Showing posts with label Bicast leather repair. Show all posts
Showing posts with label Bicast leather repair. Show all posts

Tuesday, September 21, 2010

Insights Into Bicast

For years I've taken phone calls and e-mails from distraught consumers who made the mistake of purchasing bi-cast (bicast) material when they thought it was real leather.  It is sold as leather but it is clearly NOT the real deal.  Just as fiberboard isn't real wood, bicast isn't real leather.

As a general rule, leather that has suffered damage can be successfully repaired.  In the case of bicast this is problematic as any repair can only be as strong as the surrounding material.  With bicast, the material is inherently weak.  As such, a repair to bicast will, in all likelihood, fail.

At the end of this blog entry you'll find a link to photos that have been sent to me by consumers depicting their  classic problems with bicast material.  They show the wide variety of ways bicast fails.  In the world of furniture there has never been a more true application of the phrase "buyer beware."  Bicast is a problem waiting to happen.

Here is the text of an excellent article written by Barbara Carney, a leather restoration expert in the Chicago area.

  Bi-cast and Bonded Leather is NOT Leather! So, What Is It?
.
"Bi-cast and bonded "leather" can be the right choice for you – Here’s the complete story so you can make an informed decision.

"The term “leather” is used to describe 2 completely different types of material used on furniture:

1.      Real = An intact animal hide processed to look and feel good. Very strong.
2.      Bi-cast / bonded = Plastic with a little leather and maybe some fabric glued to the back. Not so strong.

"Note: Imitation leather = Plastic with fabric glued to the back. Not so strong.

"What’s going on? Leather’s very desirable because it:
· Looks good - many different possible textures, colors and finishes
· Strong, durable – can last decades; can be repaired and recolored
· Feels good to touch – soft and flexible
· Breathes, so you don’t get clammy or too hot
· Shows you have taste and could afford the nicer things

"Real leather soils easily, so a protective paint-like colored coating is added to approx 85% of the real leather furniture sold in the U.S. It’s a thin, breathable plastic that stays flexible and still has an appealing leather feel and light smell. Consumers easily confuse this with the thicker, non-breathable plastic layer of the lower cost bi-cast and bonded leathers. By adding a little leather – about 17% - which you don’t see or touch, it’s legal in the U. S. to sell bi-cast and bonded products as leather – which most people will think means real leather. In Europe and New Zealand it’s illegal to call such products leather.

"Bi-cast is a clever product. Typically, it’s a thick layer of plastic made to look and feel like leather, laminated on top of a thin, weak layer of leather. This layer is a “split” - horizontally split from the bottom of the original hide in a big sheet. In bi-cast, you don’t see it or feel it. It adds none of the characteristics of real leather, except one: If you check the inside surface, it looks and smells like leather. Why bother? A savvy consumer may know how to check for real leather by looking at the inside for the characteristic rough suede and the smell, or a trained salesperson may show it to the consumer – “See – it’s leather!”

"Bonded leather goes one step farther: Powdered leather fibers are mixed with a resin and extruded in a sheet, like paper or particleboard. There’s no physical characteristic left of the original leather. It’s a recycling method for using scraps. Just like the asphalt on your street might contain recycled plastic bottles. The layer containing the leather is on the back, just like bi-cast.

"As Furniture Today magazine says: ...calling these products bonded leather "is deceptive because it does not represent its true nature. It's a vinyl, or a polyurethane laminate or a composite, but it's not leather. If you tar and feather someone, does that make them a chicken?" Obviously not. 

"Sometimes it's even scented like leather.  In the end, it's plastic  - it's clammy, it's much less durable, it can't be repaired - unless you consider duct tape and a slip cover a repair. Some split or delaminate and peel after a few months or just a year or 2.  Some are more durable, but it's very hard to know when you buy it. You’d need the
test data on the number of  “rubs” to be sure."

Thank you Barbara for this excellent piece.  I hope it will help alert the unsuspecting consumer to make wise choices when selecting their leather furniture.

Click on this link to see pictures representing a sampling of the problems bicast presents.


Copyright 2010, Kevin Gillan

Friday, June 12, 2009

The Bane of Bicast Leather

About 3 years ago I published an article on our web-site and also in electronic form through an on-line magazine entitled "Bicast Leather Invasion". The article has generated about 12,000 hits to date, indicating the popularity of bicast leather.

The attraction of bicast is its low price point. People are buying leather furniture manufactured with bicast despite the fact that bicast is a low grade "leather wanna-be" that lacks durability. Consumers, thinking they are getting a bargain are in fact getting what they paid for - a cheap imitation of the real deal.

So, as leather technicians, we're faced with the reality that consumers are having problems with their bicast leather furniture. Tears in the bicast leather are appearing seemingly spontaneously, typically on the top of a seat cushion. The actual source of the tear is the inherent weakness found in bicast. The problem for a leather technician is that the traditional leather repair techniques won't work with bicast leather. The standard model for leather repair assumes that the leather's fiber structure surrounding the damage has integrity. The repair is then "anchored" to these non-damaged fibers allowing the wound to be permanently "healed." This reliance on the durability of the material around the damage is essential to the repair's long-term viability. In other words with the standard model, the quality of the repair is a function of the integrity of the leather. Given that bicast is inherently weak, the standard model has to be modified. Damaged bicast requires a different approach to repair if the goal is to offer the best shot at a long lasting repair.

To that end, Advanced Leather Solutions has published on YouTube a two part video sequence demonstrating this bicast leather repair strategy.

Here's Part One...



And Part Two...




After reviewing these videos, you may still have questions. You can learn more at our web-site www.advleather.com, or call our technical help line at 510-786-6059.

You may also care to read the original "Bicast Leather Invasion" article published through ezinearticles.com

Here's the URL http://ezinearticles.com/?Bicast-Leather-Invasion&id=368242

Copyright 2009, Kevin Gillan